The report shows a value of 0, while the RI voltage is normal. The reset voltage for the first chip (RST) is 0, while the other voltages are normal. What could be the possible explanation for this anomaly?

BTC 65131.98USD

LTC 47.33USD

ETH 1797.31USD

KAS 0.03USD

ETC 7.71USD

BNB 620.52USD

ALEO 0.04USD

SOL 71.77USD

ALPH 0.03USD

XRP 1.2USD

DOGE 0.09USD

Post Q&A

HashBoard

PSU

Control board

Overclock

Downclock

Liquid cooling

Mine construction

Operation and maintenance

The report shows a value of 0, while the RI voltage is normal. The reset voltage for the first chip (RST) is 0, while the other voltages are normal. What could be the possible explanation for this anomaly?

@Sunny Anusi

2023-07-08 10:28

1432

COMMENTS1

@Ada 2023-07-10 10:40

Check if the fixture is functioning properly or if a reboot is required. Verify the reliability and integrity of the fixture. Investigate any potential issues with the data cable interface. Abnormal resistances at the interface are often the cause. By performing these checks, you can identify and address any issues related to the fixture or data cable interface that may be causing the abnormal RST reset voltage.