95174.15USD
85.81USD
2.29USD
0.18USD
1820.67USD
17.19USD
603.58USD
148.15USD
0.33USD
0.09USD
0.23USD
Post Q&A
HashBoard PSU Control board Overclock Downclock Liquid cooling Mine construction Operation and maintenance
According to the provided image, why does the machine disappear from scanning after running for two days?
@BTC-Miner
2023-07-08 09:40
642
0
0
What could be the issue if the S9K DC-DC output for headphones is too high at 10.8V, while it should be normal at 10.2V?
@BTC-Miner
2023-07-08 09:38
512
0
0
T9+ board 12V is abnormal, clamp points lower than 2.8V.
@Ada
2023-07-08 09:37
530
0
0
On the S9i machine test, is there a significant number of chips but insufficient hashrate?
@BTC-Miner
2023-07-08 09:37
487
0
0
Where should I check for the logs of the S17Pro?
@BTC-Miner
2023-07-08 09:36
466
0
0
Is there a lack of hashrate when running the entire system，How to solve the issue？
@BTC-Miner
2023-07-08 09:35
486
0
0
S9 hashboard can get 12V and domain voltage 9V when data cable unplug, but no 9V when plug in
@Ada
2023-07-08 09:17
489
0
0
The test shows garbled characters, how to solve it?
@BTC-Miner
2023-07-08 09:14
490
0
0
As shown in the picture below, T15 machine, 58, 59, 60 are all replaced, it still doesn’t work, what’s the problem.
@BTC-Miner
2023-07-08 09:10
1021
0
0
S9K control board issue,C43 control board SD card flashing fail
@Ada
2023-07-08 08:49
615
0
0
L3+ single-board teste-- temperature error
@Ada
2023-07-08 08:44
594
0
0
After flashing the PIC on the T17 hashboard, the machine is unable to run the hashrate. What could be the issue?
@Ada
2023-07-08 08:23
463
0
0
S9i hashboard, sometimes pass the single-board test, sometimes report 0.
@Ada
2023-07-08 08:17
482
0
0
S9 hashboard single -board test resulted a long string of code, the device hashrate dropped.
@Ada
2023-07-08 08:09
487
0
0
If the hashrate drops on Chain 0 and Chain 3 after running for a while. What's the problem?
@Ada
2023-07-08 08:02
485
0
0
The test report of S9 hashboard abnormal
@Ada
2023-07-08 07:49
502
0
0
S9 hashboard RI is normal from chip 63 to chip 1,short CO at chip 1,but report 0
@Ada
2023-07-08 07:42
465
0
0
The S9 control board top surface only 1 light on.
@Ada
2023-07-08 07:34
484
0
0
How to determine which voltage domain is normal when the L3+ hashboard has voltage domain imbalance?
@Ada
2023-07-08 07:30
476
0
0
Z11 hashboard is short-circuited to ground at 3.3V. After removing the IC (U3), inductor (L1) and capacitors (20, 22, 23, 24), the short circuit issue persists.
@Ada
2023-07-08 07:14
534
0
0
PgUp...56789PgDn
Active Users
@Ada
43 participate in
@Sunny Anusi
37 participate in
@Yoda
34 participate in
@BTC-Miner
18 participate in
@Bogard
3 participate in
@jread352
2 participate in
No. 88, Yangzishan Road, Chengdu, Sichuan, China
Building A, Zhihui InnovationBuilding, Shenzhen, China
D-2 Seri Gembira Avenue, Kuala Lumpur, Malaysia
+86 15390421113 minerfixesofficial@gmail.com
About Us Contact Us FAQ News
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved